Salt Test

[JCole311]

I had some trouble locating the procedure, but eventually found it. I thought, for the fun of it, I would post the steps I took and the results I got.

I took a large Ziplock freezer bag and two caps from one gallon containers. I put about 2 teaspoons salt in each cap and enough water to give the salt a "wet sand consistency". I then placed my hygrometers in the bag for 24 hours. Hygrometers should read at 75% relative humidity.

The results I received

1 Oregon Scientific Remote Unit = Perfect
1 Radio Shack Remote Units = Perfect
Radio Shack base unit = 2% low
1 Brass large Analog = 1% high
1 medium size analog = not working (didn't change at all)
1 small brass analog = 10% low

Now to test the Oregon Scientific base unit, and I will be done