Cigar Weekly

Cyclone · 06-09-2005, 07:47 AM

Quote:

Originally Posted by Nathan

Quote:

Originally Posted by Cyclone

I have the same model... See my gallery for construction pictures... PM for details or search for my thread about my conversion...

Since the pictures, I have added a Johnson Control digital thermostat to control the cooling separately from the fans which run on the timer.

Actually, you can fit the wires for the thermostat and the fans through the same hole where the coolant pipe goes through... From the back, that would be on your left. It's tight but it can be done...

cheers!

After messing around with it for quite a while I have gotten the fan wires through the hole where the refridgerant line goes! Thanks for the suggestion! I have a big wire for it, it is the size of a wire that would normally go to a lamp and it was really hard to get in there. I should be getting the thermostat tomorrow and I am hoping that the temp sensor will be able to fit through the drain hole as I don't want to cut the wire and resolder it risking raising the resistance of the wire and throwing off the signal.

Exactly what I did... lamp wire for the fans... The sensor for the Johnson Control A419 digital temperature controller went through as well... very tight fit

Don't worry about cutting the sensor wire... it's just wire... I chopped 3 ft off of mine... No problems...

For everybody, the A419 is the CATS %SS!! I'm extremely forturnate to get mine for free from a friend ( just had to buy the sensor ).

Cheers,

Rudy