Go Back   Cigar Weekly Community Forums and Discussion Groups > Smoking Post > The Cedar Room

The Cedar Room A place for cigar storage and cigar accessories discussions.

Reply
 
Thread Tools Display Modes
Old 05-13-2003, 02:53 PM   #1
qajariaq
Contributing Editor
Club Member
 
qajariaq's Avatar
 
Join Date: Jun 2001
Posts: 2,678
How to make an active humidifier?

I am thinking about making my own "mini" Cigar Oasis for my humidor - it will be smaller than the Cigar Oasis models and will run on batteries. The only thing I can not figure out myself is the automatic start/cut off for the fan. There doesnt seem to be a humidity sensor commercially available that is small enough or doesnt cost a fortune.

Anyone have any leads? Or maybe anyone that's built such a device can give me some ideas?

qajariaq is offline   Reply With Quote
Old 05-13-2003, 03:42 PM   #2
Matthew Allen
Guest
 
Posts: n/a
I worked with an electical engineer to design our Accumonitor Digital Set Point System and we really could not find a lot of humidity sensors being manufactured that were in our opinion accurate, reliable and affordable. The ones we did find were a basic sensor presented with all the pertinent tech info to apply to your design. This was way over my head which is why I hired an electical engineer.

I never could find any simple solution that was small, accurate and plug and play. The realization I came to was the sensor itself only reads the humidity level. Your design has to manipulate the data to cause fans to turn on and off and give readings on the display. In other words you have to have some type of logic chip or some type of resistive pot that can be adjusted to control fans.

There are film type humidity sensors that are used in room humidifiers that basically turn a relay on and off. When the humidity rises the film expands and loosens turning the relay(and fan) off. As the humidity lowers the film shrinks and causes the relay to turn on. It works but it is hit and miss in terms of accuracy.

I my opinion you are going to be hard pressed to find a solution that works as well as the Cigar Oasis for their asking price. If you are humidifying a small area you would be better off with silica beads(Climmax brand are great). Beads are very effective and affordable.

Just my 2 cents
  Reply With Quote
Old 05-13-2003, 04:23 PM   #3
CgarWyzrd
Club Member
 
CgarWyzrd's Avatar
 
Join Date: Aug 2002
Location: SoCal----- Herfin' USA
Posts: 1,651
Ditto what Mat said. Go with a CO. I believe they were working on a battery powered unit and it may be available.

Steve
__________________
"RIP Hoyo#9"


When they repeal the 2nd amendment, thatís when the "2nd Revolution" will begin!
CgarWyzrd is offline   Reply With Quote
Old 05-13-2003, 05:30 PM   #4
qajariaq
Contributing Editor
Club Member
 
qajariaq's Avatar
 
Join Date: Jun 2001
Posts: 2,678
I found this sensor from a google search:

http://www.sensirion.com/en/sensors/...ensorSHT75.htm

It looks to be acurate, small, and readily interchangeable. However, its made in Switzerland and trying to contact their distributor has been less than useful.

If Cigar Oasis comes out with a battery-operated Jr. model, I'm sold! Thanks for the help, guys.
qajariaq is offline   Reply With Quote
Old 05-13-2003, 05:55 PM   #5
kctaxman
Member
 
Join Date: Mar 2003
Location: Between Boardwalk & Park Place
Posts: 563
I agree, the battery powered option would be my first choice, why don't you invent one....dude.
__________________
A kite rises against, not with the wind.
kctaxman is offline   Reply With Quote
Old 05-13-2003, 06:21 PM   #6
Bob Staebell
Member
 
Join Date: Nov 2000
Location: TX
Posts: 122
I would 3rd that opinion. If you want a smaller set up, just take the electronics out of the CO & make your own case. I doubt that one could "buy" the separate components as an individual for the cost of a complete CO.

Cheers,

Bob Staebell
Bob Staebell is offline   Reply With Quote
Reply

Bookmarks
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 04:56 AM.