|
The Cedar Room A place for cigar storage and cigar accessories discussions. |
|
Thread Tools | Display Modes |
|
08-16-2017, 06:18 AM | #1 |
Contributing Editor
Herf Meister
Join Date: Mar 2003
Location: Central, Iowa
Posts: 9,806
|
Ashtray stands
I got interested in ashtray stands about 15 years ago. It took me a few tries to figure out the best technique and materials to use. But once I hit my stride, over the course of about 5 years or so, I think I made some ashtray stands look better than when they were new.
Stripping off a crappy repaint was usual. Often I was amazed to find perfectly good plated parts or even solid cast and polished bases. There is virtually nothing out there about who made all these ashtray stands or how they were made. I've made some suppositions based primarily on style. The earliest stands have a solid cast base. It may be cast iron or a polished brass type alloy. These have smaller (4 inch) ashtrays, but are always stylistically interesting. Later stands have a separate base weight screwed to the center shaft and covered by a stamped metal piece. The metal and plating on the later versions of these get progressively thinner. And some ashtray and smoking stands are chrome plated. No point in messing with those so I left them alone. I'll start by posting one of the older ones. Probably late 19th century. This one has a solid brass or bronze bass that was polished. It was painted. I stripped it and used 0000 steel wool to bring back the shine. That works on all the shiny parts. It has, or had, a smaller one of a kind fitted ashtray. Shortly after selling it I was contacted and told that the (probably) 100+ year old ashtray had been broken. Did I have another? I did not. And I looked for awhile and never saw another. |
08-16-2017, 08:43 AM | #2 |
Publisher/Owner
El Chefé BBQ Guru Herf God
Join Date: Oct 2001
Location: Atlanta.
Posts: 55,778
|
I have one from the 50s that is a combination of end table, ashtray and floor lamp that belonged to my grandparents. Real space age design. I suspect that the ones you are working on are much more attractive.
__________________
Every time you think you've become too cynical, the world finds a way to teach you that the real problem is that you haven't become cynical enough Free speech is free speech is free speech. There is no qualifier. If you aren't outraged, you aren't paying attention. Never attribute malice to that what can be explained as stupidity. Unborn lives matter too. |
08-16-2017, 09:27 AM | #3 |
Contributing Editor
Herf Meister
Join Date: Mar 2003
Location: Central, Iowa
Posts: 9,806
|
Sounds interesting Jason. I might buy something like that if I saw it in a thrift store. I like the 50s-60s aesthetic. The early Art Nouveau and Art Deco pieces are more ornate and interesting to look at. I did do a few wooden stands. One of them may have been a close cousin to what you describe. Here it is:
This is one of the few wooden stands I did. My guess is it's a late 40s-50s product. Has an Eames era look to it. I stripped the crappy factory spray varnish. It was in bad shape. The walnut didn't need any stain. I used the tung oil varnish. Nice simple design. |
08-16-2017, 06:45 PM | #4 |
Contributing Editor
Club Member
Join Date: Aug 2001
Location: Tx / Cozumel
Posts: 3,918
|
Anhhhh here's what I like . Quality workmanship for sure!
|
08-17-2017, 04:55 AM | #5 |
Contributing Editor
Herf Meister
Join Date: Mar 2003
Location: Central, Iowa
Posts: 9,806
|
Here's an example of the stamped metal over a cast weight base. Maybe a 1920s stand. The ashtray is the larger 8 inch version. This type is really my favorite. My Grandfather had a similar one.
|
08-17-2017, 09:21 AM | #6 |
Club Member
Join Date: Feb 2002
Location: Florida, NY USA
Posts: 4,806
|
I have one like that with a ram (I think) running with the horns pulled back as a handle. Got it at a local antiques dealer
__________________
Life's too short to smoke cheap cigars |
08-19-2017, 11:40 AM | #7 |
Contributing Editor
Herf God
Join Date: Jul 2004
Location: Camillus, NY
Posts: 16,121
|
Here's a picture. It's not fancy. It's the sort of ashtray that would have been common in offices and public places in the 80s.
Sent from my iPhone using Tapatalk
__________________
Rob If people can tell me where to smoke, I can tell them where to go, too. |
08-19-2017, 12:21 PM | #8 |
Contributing Editor
Herf Meister
Join Date: Mar 2003
Location: Central, Iowa
Posts: 9,806
|
Looks like it could have been made in the 50s or 60. Very sparse in design. Utilitarian and very modern. Fits the ambience of the room you have it in. Nice piece!
|
08-19-2017, 07:45 PM | #9 |
Contributing Editor
Herf God
Join Date: Jul 2004
Location: Camillus, NY
Posts: 16,121
|
I don't know much about it. My Dad bought it for next to nothing. I'm sure they were quite common at one time in offices and other such environments. But the ashtray is designed to hold cigars.
__________________
Rob If people can tell me where to smoke, I can tell them where to go, too. |
08-20-2017, 04:47 AM | #10 |
Contributing Editor
Herf Meister
Join Date: Mar 2003
Location: Central, Iowa
Posts: 9,806
|
As late as the 70s when people still smoked in buildings, it was more common to see cigarette floor ashtrays. I'm thinking of the ones with the button to open a trap door and dump your ashes and butt into the can. Frequently the innards would catch fire and create a pain in the ass for someone.
And the big cylinder floor ashtrays were pretty common as well. |
Bookmarks |
Tags |
Ash tray, Ash tray stand, Ash tray stands, Ash trays, xrundog, xrundog restorations |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ashtray stands at Wal-Mart | mealstrom | The Cedar Room | 21 | 09-18-2008 10:02 AM |
Anybody else like ashtray stands? | xrundog | The Cedar Room | 16 | 06-28-2004 04:51 PM |
Cigar ashtray stands | Smokestack Jack | The Cedar Room | 14 | 11-12-2003 05:03 PM |
Ashtray Stands | stogie5150 | Cigar Talk | 22 | 03-28-2003 06:25 AM |